TuftexONDURA
Call: 800.777.7663
Ondura

Corrugated Asphalt Roofing by Onduline North America


ONDURA® Corrugated Asphalt Roofing Sheets and Tiles

For more information about ONDURA, please go to our product description page.

ONDURA sheets and tiles are available in eight baked-on colors: red, brown, green, tan, blue, gray, white, and black.

ONDUDRA color swatches
ONDUDRA color swatches

ONDURA Sheets

Sheet Specifications
Corrugations: 12
Sheet Size: 48 inches by 79 inches
Sheet Weight: 18 pounds per sheet
Single Sheet: MSRP $23.00

For projects requiring more than one sheet, account for overlaps in calculating roof coverage. The minimum side lap is one corrugation (4 inches per corrugation). The minimum headlap is 7 inches. Therefore, the effective sheet coverage is 44 inches wide by 72 inches high. Please read our installation instructions for more details.

ONDURA sheets

ONDURA Tiles

Tile Specifications
Tile Size: 48 inches by 19.75 inches
Tile Weight: 4.5 pounds per tile
Tile 4-Pack: MSRP $28.00

A traditional roofing “square” (i.e., 100 square feet) can be covered by 24 ONDURA tiles. Please read our installation instructions for more details.

ONDURA sheets

Color-Matched Washered Nails

Genuine ONDURA washered steel nails are galvanized and ring shanked, and have a large EPDM rubber washer to improve sealing around the nail. These nails are painted to color match each of the eight colors of the ONDURA sheets and tiles. The galvanized steel nails are available in 3-inch length for typical applications and 4-inch length for installation over rigid insulation material. Please read our installation instructions for more details.

Box of 100 3-inch galvanized steel nails: MSRP $12.00
Box of 60 4-inch galvanized steel nails: MSRP $10.25

ONDURA sheets

Ridge Cap

ONDURA ridge caps are available in two widths and two lengths:

  • ONDURA Ridge Cap – Regular: 12.5 inches by 39.5 inches
  • ONDURA Ridge Cap – Long: 12.5 inches by 79 inches
  • ONDURA Wide Ridge Cap – Regular: 19.25 inches by 39.5 inches
  • ONDURA Wide Ridge Cap – Long: 19.25 inches by 79 inches
The 12.5-inch ridge cap is used for roofing on typical DIY and residential structures. The 19.25-inch ridge cap is used for roofing on agricultural or commercial structures. All ONDURA ridge caps are made from the same material as the ONDURA sheets and tiles, and are color matched to the same eight colors. A 7-inch overlap is recommended along a roof ridge or hip. Please read our installation instructions for more details.

ONDURA Ridge Cap – Regular: MSRP $8.00
ONDURA Ridge Cap – Long: MSRP $16.00
ONDURA Wide Ridge Cap – Regular: MSRP $8.50
ONDURA Wide Ridge Cap – Long: MSRP $17.00

ONDURA ridge cap

Ridge Cap Side

ridge cap

Closure Strips

ONDURA closure strips seal the open space created by the corrugations. The closure strips are available in solid and vented styles. Use vented closure strips at the eave and ridge to allow airflow beneath the corrugations, but keep out rain, birds and insects. Use the solid closure strips in roof hips and valleys. Please read our installation instructions for more details.

Vented closure strips (4 pack): MSRP $12.75
Solid closure strips (4 pack): MSRP $12.75

ONDURA ridge cap

Vented Closure Strips

ONDURA vented closure strips

Solid Closure Strips

 
Privacy Policy | Terms of Use

© 2015 Onduline North America Onduline North America